AM+RF TAG INDICATOR
COST: 35$ (approx. 2500 RUB)
/// DISGUISED AS A COMPACT KEYCHAIN FLASHLIGHT /// WARNING: THIS IS NOT A FINDER!
This keychain does NOT LOCATE hidden tags (sensors, hard tags, alarms, stickers, etc.)!
To locate hidden tags, use the dedicated device — AM/RF SEARCHER.
WHY DO YOU NEED THIS DEVICE?
- Eliminate the need to carry bulky stolen security tags (alarms, magnets, beepers, and other slang terms for the same thing).
- For precise AM-field detection: identify exactly which systems are Acousto-Magnetic (AM) or test the system type (AM or RF) by pressing a button.
- Equipment diagnostics:
- Verify the build quality of booster bags or shielding fabrics.
- Test the suppression efficiency of your jammers against specific EAS pedestals.
- Divert staff attention from the sales floor to the entrance zone by intentionally triggering gate alarms (requires tactical ingenuity and intelligence).
⚠️ Re-read the above. Watch the VIDEO demonstration below for clarity!
OPERATIONAL LOGIC
/// MODE 1: PASSIVE INDICATION (AM FIELD) ///
AM-field detection is always active (except when a button is pressed).
• LEDs will ILLUMINATE when approaching active AM pedestals.
• LEDs will REMAIN DARK when approaching deactivated gates (dummies) or non-AM systems (e.g., RF).
• LEDs will ILLUMINATE when approaching active AM pedestals.
• LEDs will REMAIN DARK when approaching deactivated gates (dummies) or non-AM systems (e.g., RF).
NOTE: No button press required for this mode. The device harvests energy directly from the AM pedestal signal—no battery power is consumed for passive indication.
/// MODE 2: ACTIVE TESTER (BUTTONS) ///
Two buttons serve to force simulation (activation) of an AM or RF tag.
• Tag simulation is active only while holding the button. The signal stops immediately upon release.
• OPERATIONAL NUANCE: Pressing and holding both buttons simultaneously reduces the tag's visibility to the pedestals.
• Tag simulation is active only while holding the button. The signal stops immediately upon release.
• OPERATIONAL NUANCE: Pressing and holding both buttons simultaneously reduces the tag's visibility to the pedestals.
PRO TIP: Hold only one button at a time or alternate between them if you are unsure of the EAS system type.